![unitek](http://alphaindustries.tech/wp-content/uploads/2023/09/unitek.jpg)
Ball Screw Driven Servo UTM – Electro-mechanical UTM
This is a Ball Screw Driven Servo UTM. Available only Servo Computerised Mode – These machines are available from 20 kG (200 N) to 20 Ton (200 kN). These Machines are built as per IS 1608 / ISO 6892 / ASTM E8 where you can control Load Rate, Displacement Rate, Stress RAte, Strain Rate as per your requirement. These machines are used in Textile, Rubber, Polymer, Metal etc Industries
![screen_2](http://alphaindustries.tech/wp-content/uploads/2023/02/screen_2.png)
![screen_1](http://alphaindustries.tech/wp-content/uploads/2023/02/screen_1.png)
![post_processing](http://alphaindustries.tech/wp-content/uploads/2023/02/post_processing.png)
Hardware USP
- Piston Stroke : 200mm
2. Load Resolutions : 50000 / 100000 Counts
3. Load Accuracy : ± 1% of shown reading
4. Displacement resolution : 0.01 mm / 0.002 mm Optional
5. Displacement Accuracy : ± 0. 5% of shown reading
6. Extension Resolution : 0.001 mm / 0.0001 mm optional
7. Extension Accuracy : ± 1% of shown reading
8. Peak Load displayed on the controller post test automatically
9. Supports Extensometer of any make. Also, facility to connect upto 6 extensometers can be added on request
10. Calibration and use of upto 10 Load Cells of different capacities is possible
11. RS485 Communication protocol with PC software – works upto 30 meters
Software USP
- Load / Displacement / Extension display on Home Page.
- Video Extensometer Integration
- Sample type customization
- Real time graph in selected units for Load and Stress.
- Integration of multiple extensometers in one system
- Can save calibration for each one of the seperately.
- Real Time Load Rate/ Disp Rate / Stress rate display in Servo Mode
- Ability to Freeze real time graph
- Prefect yield calculation as per customer demand
- Accurate calculation from graphical method
- ASTM method offset selection from 0.1 % to 1 %c.
- Yield calculation method can be change post test
- Ability to select / unselect results displayed in printed report.
- Ability to change input parameters (Gauge length / CS. Area) post test.
11. Ability to add up to 5 extra Key-Value Pairs as input. Customer can use these key value pairs as per his requiremen
12. Ability to add up to 10 extra Key-Value Pairs in report header. Customer can use these key value pairs as per his requirement
13. Ability to export reports to excel with graph.
14. Ability to print all Test Data Points of a selected test in selected units.
15. Graph Cursor – Zoom – Pan Facilit
16. Unlimited Tests in one batch file
17. Proof stress calculation from 0.1 % to 1 % offse
18. Report Customization as per customer demand.
Additional Features – Only in Servo Mode
- Load Rate accuracy control +- 3 % or +- 3 kN of set Load Rate
2. Displacement Rate accuracy of +- 2% or +- 2 mm of set Disp. Rate
3. Real time display of Load Rate and Displacement Rate
4. Auto Detect Yield facility for shifting from Load Rate to Displacement Rate
5. Hold Load upto 250 Secs with appropriate valve settings.
6. Load Rate / Stress Rate can be set in required