Extensometer

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings. Your content goes here. Design settings and even apply custom CSS to this text in the module Advanced settings. Your

Hardware USP

  1. 50000 Counts over the range for Load
  2. 100,000 counts optional for load
  3. Extensometer Facility integrated by default in Motherboard
  4. Single Point Controller Calibration For Load and Extensometer.
    1. No potentiometers required
    2. No PC software required

Peak Load displayed on the controller post test automatically.

  1. Supports extensometer of any make
  2. Machine turn off on rupture – No Pc software required
  3. RS485 Communication protocol with PC software – works upto 100 meters

 

Software USP

  1. Load / Displacement / Extension display on Home Page.
  2. Video Extensometer Integration
  3. Sample type customization
  4. Real time graph in selected units for Load and Stress.
  5. Integration of multiple extensometers in one system
    1.  Can save calibration for each one of the seperately.
  6. Real Time Load Rate/ Disp Rate / Stress rate display in Servo Mode
  7. Ability to Freeze real time graph
  8. Prefect yield calculation as per customer demand
    1. Accurate calculation from graphical method
    2. ASTM method offset selection from 0.1 % to 1 %c.
    3. Yield calculation method can be change post test
  9. Ability to select / unselect results displayed in printed report.
  10. Ability to change input parameters (Gauge length / CS. Area) post test.

11. Ability to add up to 5 extra Key-Value Pairs as input. Customer can use these key value pairs as per his requirement

  1. Ability to add up to 2 extra Key-Value Pairs in report header. Customer can use these key value pairs as per his requirement
  2. Ability to export reports to excel with graph.
  3. Ability to print all Test Data Points of a selected test in selected units.
  4. Graph Cursor – Zoom – Pan Facility
  5. Unlimited Tests in one batch file.
  6. Proof stress calculation from 0.1 % to 1 %
  7. Report Customization as per customer demand.

Additional Features

  1. Load Rate accuracy control +- 3 % or +- 3 kN of set Load Rate within specified limits
  2. Displacement Rate accuracy of +- 2% or +- 2 mm of set Disp. Rate
  3. Real time display of Load Rate and Displacement Rate (On Demand)
  4. Working  Auto Detect yield facility for changing from Load Rate to Displacement Rate
  5. Hold  Load upto 250 Secs with appropriate valve settings.

Load Rate / Stress Rate can be set in required units

Load Rate : 

347.57 (kN/min) from 139.84kN [136.4 sec]  To  273.22 kN [159.4 sec]

Displacement Rate :

12.4 (mm/min) from 41.58 mm [325.2 sec] To 27.21 mm [255.7 sec]