Servo Hydraulic UTM

This is a manual gripping Servo Hydraulic UTM. Available in Servo and Manual Mode – both of which are computerised. These machines are available from 10 Ton (100 kN) to 120 Ton (1200 kN). These Machines are built as per IS 1608 / ISO 6892 / ASTM E8 where you can control Load Rate, Displacement Rate, Stress RAte, Strain Rate as per your requirement. Higher capacity UTM (upto 200 Ton) available on request. We provide additional Load Cell and Gripping Attachment for smaller / delicate samples for effective testing on these machines

Hardware USP

  1. Piston Stroke : 200mm
    2. Load Resolutions : 50000 / 100000 Counts
    3. Load Accuracy : ± 1% of shown reading
    4. Displacement resolution : 0.01 mm / 0.002 mm Optional
    5. Displacement Accuracy : ± 0. 5% of shown reading
    6. Extension Resolution : 0.001 mm / 0.0001 mm optional
    7. Extension Accuracy : ± 1% of shown reading

    Software USP

    1. Load / Displacement / Extension display on Home Page.
    2. Video Extensometer Integration
    3. Sample type customization
    4. Real time graph in selected units for Load and Stress.
    5. Integration of multiple extensometers in one system
      1.  Can save calibration for each one of the seperately.
    6. Real Time Load Rate/ Disp Rate / Stress rate display in Servo Mode
    7. Ability to Freeze real time graph
    8. Prefect yield calculation as per customer demand
      1. Accurate calculation from graphical method
      2. ASTM method offset selection from 0.1 % to 1 %c.
      3. Yield calculation method can be change post test
    9. Ability to select / unselect results displayed in printed report.
    10. Ability to change input parameters (Gauge length / CS. Area) post test.

    11. Ability to add up to 5 extra Key-Value Pairs as input. Customer can use these key value pairs as per his requiremen

    12. Ability to add up to 10 extra Key-Value Pairs in report header. Customer can use these key value pairs as per his requirement

    13. Ability to export reports to excel with graph.

    14. Ability to print all Test Data Points of a selected test in selected units.

    15. Graph Cursor – Zoom – Pan Facilit

    16. Unlimited Tests in one batch file

    17. Proof stress calculation from 0.1 % to 1 % offse

    18. Report Customization as per customer demand.

    Additional Features – Only Servo Machines

    1. 1. Load Rate accuracy control +- 3 % or +- 3 kN of set Load Rate
      2. Displacement Rate accuracy of +- 2% or +- 2 mm of set Disp. Rate
      3. Real time display of Load Rate and Displacement Rate
      4. Auto Detect Yield facility for shifting from Load Rate to Displacement Rate
      5. Hold Load upto 250 Secs with appropriate valve settings.
      6. Load Rate / Stress Rate can be set in required units

    Load Rate set in software : 345 kN/min 

    Load Rate Achieved : 347.57 (kN/min) from 139.84kN [136.4 sec]  To  273.22 kN [159.4 sec]

    Displacement Rate set in software : 12 mm/min

    Displacement Rate Achieved : 12.4 (mm/min) from 41.58 mm [325.2 sec] To 27.21 mm [255.7 sec]